Wallpanel Minimum Dimension
MinDimensionWallPanelRule
Availability of a wall panel after modifications.
Notification level: ⚠
| Key | Value |
|---|---|
| ID | MinDimensionWallPanelRule |
| Translation key | wallpanel_min_dimension_rule_title wallpanel_min_dimension_rule_error_message |
Behavior
This rule ensures that the final configuration of the wall panels does not include a wall panel with dimension lower than the minimum dimension allowed.
Trigger Conditions
It is triggered if the dimensions of the wall panel is under the minimum values allowed.
Those minimum values are defined by the defaultValue of the parameter “minWidth” and “minHeight” or by range values of the parameter "width", "depth", and "height" present at the generic Product level (if present in the parameter section). The price of the project is also made unavailable until the current dimension of the board is of the minimum dimension allowed.
NOTE : If the wall panel does not have the property "minWidth" or "minHeight" OR the values of parameters "width", "depth", and "height" are not of real continous kind, user cannot be prevented from proceeding to order the wall panel.
Illustration
The current dimension of the wall panel board is under the minimum dimension allowed, the rule is triggered and informs the user to increase the wall panel dimensions.
As the rule gets triggered the price of the board becomes unavailable.
Once the user increases the wall panel dimensions above the minimum allowed values, the design is error free.
