Parameters for Decorative Legs
This table contains all the possible or required parameters to set up decorative legs in the Kitchen applications (3DCloud, Assembly Editor).
➡️ See the tutorial Set Up Decorative Legs for a concrete case on the use of parameters in 3DCloud and Assembly Editor.
Mandatory Parameters
The following parameters are mandatory and must be set for a decorative leg.
| Parameter Name | Parameter Type | Status | Default Value | Possible Values | Function |
|---|---|---|---|---|---|
width | real | mandatory | – | [0 ;∞] | Defines the product size of the model on the X-axis (from left to right). |
depth | real | mandatory | – | [0 ;∞] | Defines the product size of the model on the Y-axis (from front to back). |
height | real | mandatory | – | [0 ;∞] | Defines the product size of the model on the Z-axis (from bottom to top). |
Optional Parameters
Reserved name parameter
The following parameters are optional and the name of the parameter are reserved words (can not be modified). To set up these parameters you should use the exact name of the parameter.
| Parameter Name | Parameter Type | Status | Default Value | Possible Values | Function |
|---|---|---|---|---|---|
backAdditionalLegPosition | integer | optional | 0 | [-∞ ; ∞] | Defines the position of a straight additional decorative leg on the right. If the value is negative, it corresponds to the distance from the left side of the cabinet to the left side of the additional leg. If the value is positive, it corresponds to the distance from the right side of the cabinet to the right side of the additional leg. If the value is 0, it means that no additional legs is present. It is used in FurnitureDecoLegRule to handle the decorative leg configuration. |
leftAdditionalLegPosition | integer | optional | -1 | [-1] ∪ [0 ;∞] | Defines the position of a straight additional decorative leg on the left. -1 means that no left additional legs is present. It is used in FurnitureDecoLegRule to handle the decorative leg configuration. |
leftDecoLegOption | integer | optional | 1 | 1/2/3/4/5/6/7 | Defines the activation of a straight or corner decorative leg on the left. It is used in FurnitureDecoLegRule to handle the decorative leg configuration. |
rightDecoLegOption | integer | optional | 1 | 1/2/3/4/5/6/7 | Defines the activation of a straight or corner decorative leg on the right. It is used in FurnitureDecoLegRule to handle the decorative leg configuration. |
rightAdditionalLegPosition | integer | optional | -1 | [ -1 ] ∪ [0 ;∞] | Defines the position of a straight additional decorative leg on the right. -1 means that no left additional legs is present. It is used in FurnitureDecoLegRule to handle the decorative leg configuration. |