Parameters for Decorative Plinths

 

This table contains all the possible or required parameters to set up decorative plinths in the Kitchen applications (3DCloud, Assembly Editor).

➡️ See the tutorial Set Up Decorative Plinths for a concrete case on the use of parameters in 3DCloud and Assembly Editor.

Mandatory Parameters

The following parameters are mandatory and must be set for a decorative plinth.

Parameter Name	Parameter Type	Status	Default Value	Possible Values	Function
width	real	mandatory	–	[0 ;∞]	Defines the product size of the model on the X-axis (from left to right).
depth	real	mandatory	–	[0 ;∞]	Defines the product size of the model on the Y-axis (from front to back).
height	real	mandatory	–	[0 ;∞]	Defines the product size of the model on the Z-axis (from bottom to top).

---

Optional Parameters

Reserved name parameter

The following parameters are optional and the name of the parameter are reserved words (can not be modified). To set up these parameters you should use the exact name of the parameter.

Parameter Name	Parameter Type	Status	Default Value	Possible Values	Function
plinthPositionType	string	optional	onLeg	onLeg / onFrame/ onFront	Defines if the decorative plinth will be generated either on the path defined on the frame of the box or on the front of the cabinet, or if the plinth will be generated by taking the offset values defined on the top-assembly into account
regularPlinth	product	optional	–	–	Additional parameter needed for decorative plinth to define the link between the current decorative plinth and its regular plinth, which is in this case, priced in the bill of material (BOM) and part of the item list.
section	product	optional	–	–	Defines the shape to use for the decorative plinth instead of the default rectangular one obtained via the depth and height parameters. By default and if "section" parameter is not set, the section of the plinth is automatically rectangular.