Parameters for Handles

 

This table contains all the possible or required parameters to set up handles in the Kitchen applications (3DCloud, Assembly Editor).

➡️ See the tutorial Set Up Handles for a concrete case on the use of parameters in 3DCloud and Assembly Editor.

Mandatory Parameters

The following parameters are mandatory and must be set for a handle.

Parameter Name	Parameter Type	Status	Default Value	Possible Values	Function
width	real	mandatory	–	[0 ;∞]	Defines the product size of the model on the X-axis (from left to right).
depth	real	mandatory	–	[0 ;∞]	Defines the product size of the model on the Y-axis (from front to back).
height	real	mandatory	–	[0 ;∞]	Defines the product size of the model on the Z-axis (from bottom to top).

---

Optional Parameters

Recommended name parameter

The following parameters are optional and the name of the parameter are recommended (can be modified). To set up these parameters you can chose whatever the name you want.

Parameter Name	Parameter Type	Status	Default Value	Possible Values	Function
type	integer	optional	–	1/2/3	Defines the product type. Possible values are: ▪️ 1 for classic ▪️ 2 for on edge ▪️ 3 for drop handle
frontWidth	real	optional	–	[0;∞]	Defines the size of the door as an input on the X-axis of the assembly (from right to left).
frontDepth	real	optional	–	[0;∞]	Defines the size of the door as an input on the Y-axis of the assembly (from front to back).
frontHeight	real	optional	–	[0;∞]	Defines the size of the door as an input on the Z-axis of the assembly (from bottom to top).
xHandleOffset	real	optional	–	[0;∞]	Defines the size of the gap between the edge of the door and the handle on the X-axis of the assembly (from right to left).
zHandleOffset	real	optional	–	[0;∞]	Defines the size of the gap between the edge of the door and the handle on the Z-axis of the assembly (from bottom to top).