Parameters for Legs

 

This table contains all the possible or required parameters to set up legs in the Kitchen applications (3DCloud, Assembly Editor).

➡️ See the tutorial Set Up Legs for a concrete case on the use of parameters in 3DCloud and Assembly Editor.

Mandatory Parameters

The following parameters are mandatory and must be set for a leg.

Parameter Name	Parameter Type	Status	Default Value	Possible Values	Function
width	real	mandatory	–	[0 ;∞]	Defines the product size of the model on the X-axis (from left to right).
depth	real	mandatory	–	[0 ;∞]	Defines the product size of the model on the Y-axis (from front to back).
height	real	mandatory	–	[0 ;∞]	Defines the product size of the model on the Z-axis (from bottom to top).

---

Optional Parameters

Reserved name parameter

The following parameters are optional and the name of the parameter are reserved words (can not be modified). To set up these parameters you should use the exact name of the parameter.

Parameter Name	Parameter Type	Status	Default Value	Possible Values	Function
xLegOffset	real	optional	–	[0 ;∞]	Defines a symmetric offset between left or right side of the cabinet and the leg position on the X-axis.
yFrontLegOffset	real	optional	–	[0 ;∞]	Defines the offset between the front side of the cabinet and the leg position on the Y-axis.
yBackLegOffset	real	optional	–	[0 ;∞]	Defines the offset between the back side of the cabinet and the leg position on the Y-axis.
leftLegOption	integer	optional	1	1/2/3/4	Enables the FurnitureLegRule to handle the leg configuration.
rightLegOption	integer	optional	1	0/1/2	Enables the FurnitureLegRule to handle the leg configuration.
supportLegOption	boolean	optional	TRUE	TRUE / FALSE	Enables the FurnitureLegRule to handle the leg configuration.