Impact of Leg Changes on Cabinets
LegHeightRule
Impact of leg changes on cabinets.
Notification level: Not applicable
Key | Value |
---|---|
ID | LegHeightRule |
Translation key | Not applicable |
Behavior
This rule calculates and modifies the height of the impacted cabinets when the user changes the height of the leg, in order to maintain the valid configuration of the kitchen.
Trigger Conditions
If the user changes the leg type, which modifies the height of leg, the rule is triggered and the application modifies the height (according to the height of the leg) of the impacted cabinets. Only the cabinets(or products) are above (like wall cabinets, hoods, etc) or on (such as kitchen accessories) the leg height changed cabinet will be impacted.
Illustration
In the kitchen configuration below the cabinet height is 207 mm away from the ceiling (207 is the overload value in this example):
The user has modified the type of legs which impacts the cabinet: its height is now reduced to 187mm away from the ceiling:
Because the legs' height have been changed, the rule is triggered and modifies the position of the base cabinets as well as the wall cabinets in order to maintain a valid configuration for the kitchen.
The distance between base cabinet and the wall cabinets has been maintained.
The rule takes all type of products into account: base, wall, corner & high cabinets, precut & custom worktops, except the freestanding products.
Height of the objects placed on the worktop, are also automatically modified according to the height of the legs:
Before changing the legs
After changing the legs