Release Notes

Our Release Notes provide information on the features and improvements available within the solution, including deliverables from previous releases. If you have any feedback, enhancement requests or comments, please reach out to us through the 3DVIA User Community 🔗.

Pre-release Features

Where a change has an impact on the user interface of the solution, and there is no option to either disable the feature though an Application Distribution parameter or catalogue data, the feature is added as pre-release. This gives time for a retailer to review the feature.

Features remain in pre-release for a minimum of 4 weeks after its announcement as a pre-release feature. After this period features are then moved to released where they are available in the standard solution.

The current list of pre-release features is available through the 3DVIA User Community 🔗.

Access Pre-release Features

The easiest way to discover these pre-release features is directly within the Bryo application 🔗.

To activate these enhancements within your own environment you need to integrate HomeByMe for Retailers in an iframe with an extra URL parameter "appBeta" or "beta".

¹ Requires application configuration ² Requires catalogue data

Release Content

Kitchen 2024.12.0

December 11, 2024

What’s New and Improved

Released

• Retailers can deactivate the cornice, baseboard and picture rail feature. Application Distribution

Released (previously in pre-release)

• Users can take a screenshot of their project in Kitchen application. Create Screenshot
• Retailers can define worktop edges that can only be applied on a worktop front edge. ¹ Edge Board Compatibility Rule

Bug Fixes

• We fixed an issue related to HQ rendering which compensation light intensity was badly computed.
• We fixed an issue related to 2D Plan generation which were not computed correctly in specific cases.
• We fixed an issue related to translations where some of them were not translations properly in print widget.

Kitchen 2024.11.1

November 26, 2024

What’s New and Improved

Pre-release

• Retailers can optimize the filler pieces calculation. ¹ Application Distribution
• Retailers can configure an ordered list of default values on parameters to take into account the expired products. Replace Expired Values Rule

Bug Fixes

• We fixed a issue in 2D Plans generation when a linear product is not in any room.
• We fixed an issue related to UI of pricing which was not displayed correctly in case of external pricing.
• We fixed an issue related to HQ rendering generation which was blocked for some projects.
• We fixed an issue related to 2D Plans generation when the application loads external symbols.
• We fixed an issue related to a wrong translation for waterfall type label.

Kitchen 2024.11.0

November 6, 2024

What’s New and Improved

Released

• Retailers can sell floor and wall covering products per pack and in imperial. ² Coverings | Functionalities in Floorplan | ¹ Business Rules

Released (previously in pre-release)

• Users can see discounted price on their products and on the total price of the project.Setup Pricing
• Users can press Ctrl+A to select all the products in their project and use copy/paste feature to put in another project. Available Shortcuts
• Users can multi-select several products through the shortcult Ctrl + Drag click. Available Shortcuts

Bug Fixes

• We fixed an issue related to text annotation which was not in the correct location in 2D Plans.
• We fixed an issue related to freeshapes which were not displayed correctly in the 2D Plans.
• We fixed an issue related to a Business rule "EdgeBoardCompatibilityRule" which caused an issue for view generation of 2D plans.
• We fixed an issue related to substitiion step in Template Editor which didn't work properly during product replacement.
• We fixed an issue related to Front Elevation view, some products were not displayed when a opening is in the same wall.

Kitchen 2024.10.1

October 21, 2024

What’s New and Improved

Released

• Retailers can see "roomName" and "viewName" values in the metadata of 2D Plans medias. ¹ Web Services

Bug Fixes

• We fixed an issue related to wrong redirection in edit polished underside view.

Kitchen 2024.10.0

October 14, 2024

What’s New and Improved

Released (previously in pre-release)

• Users can scroll to the bottom of the menu and see the other results automatically.

Pre-release

• Users can take a screenshot of their project in Kitchen application. Create Screenshot
• Retailers can define worktop edges that can only be applied on a worktop front edge. ¹ Edge Board Compatibility Rule

Bug Fixes

• We fixed an issue related to custom cabinet management which was not displayed correctly when the project is reopened in specific conditions.
• We fixed an issue related to depth dimensions which were not displayed properly in 2D Plans.
• We fixed RTL case and manage it properly for new filters panel.
• We now display the risers and cornices correctly in the Front Elevation view.
• We fixed an issue for HomeByMe export which did not work properly on Safari browser.
• We now display properly the bays in the Front Elevation view.
• We fixed an issue related to a Business rule which check the collision between a product and an opening.
• We fixed a crash when we reopened a project with specific products, new restrictions and position rules are now applied.

Kitchen 2024.9.1

September 24, 2024

What’s New and Improved

Released

• Retailers can see the information related to the style of their projects in ProjectInfos.
• Retailers can configure the top bar menu. ¹ Dynamic Branding
• Retailers can now configure the pricing method for risers. ¹ Risers Rule
• Retailers can add a marketZone attribute in the product price in order to have the correct price between app distributions. ¹ Application Distribution

Released (previously in pre-release)

• Users can see the relevant design issues during project planning. Design issues - User guide
• Users can configure wall coving, dado rails and skirting in the application. ² Wall Mouldings | ² Set Up Mouldings

Pre-release

• Users can see discounted price on their products and on the total price of the project.Setup Pricing
• Users can press Ctrl+A to select all the products in their project and use copy/paste feature to put in another project. Available Shortcuts
• Users can multi-select several products through the shortcult Ctrl + Drag click. Available Shortcuts
• Users can scroll to the bottom of the menu and see the other results automatically.

Bug Fixes

• We fixed an issue related to the plinth pricing in a specific condition.
• We fixed an issue related to HomeByMe project import feature for specific products.
• We fixed an issue related to a crash when a product is outside the room.
• We fixed an issue related to an inconsistent behavior of camera movement in Photo Studio.

Kitchen 2024.9.0

September 02, 2024

What’s New and Improved

Released

• Retailers are notified when the project is not saved.

Released (previously in pre-release)

• Users can copy / paste products from one project to another. Available Shortcuts

Bug Fixes

• We fixed an issue related to screenshots not generated correctly for front elevation view
• We fixed an issue related to BOM computation when the project contains external bays
• We fixed an issue related to annotations accessible in measure layer 2D view
• We fixed an issue related to the front elevation view when there are doors or windows on the wall
• We fixed an issue related to cornice option that were not always available on walls
• We fixed an issue related to translations in catalog search feature

Kitchen 2024.8.1

August 26, 2024

Bug Fixes

• We fixed an issue related to the screenshots not generated correctly in the front elevation view.
• We fixed an issue related to an input error position in edit covering panel

Kitchen 2024.8.0

August 19, 2024

What’s New and Improved

Released (previously in pre-release)

• User projects now includes the price of openings. ¹ Bays Pricing

Bug Fixes

• We fixed an issue related to missing measures when using the position tool.
• We fixed an issue related to overlapping dimensions in the front elevation view.
• We fixed an issue related to the opening of template files directly from their UUID when the user has access to several legal entities.
• We fixed an issue related to the rule LightingBOMRule that could miss power cords in some cases depending on data.
• We fixed an issue related to inconsistent slope ceiling measurements.
• We fixed an issue related to the wrong wall being displayed when setting the front elevation view.
• We fixed an issue related to the search bar in product replacements that could display no results.

Kitchen 2024.7.2

July 31, 2024

What’s New and Improved

Released

• Retailers can specify an array of product IDs in applicative rules data in order to support expiring products. ¹ Lighting Product BOM | Kitchen Island BOM | Suspension Rail Fittings | Filler Style | Mapping Table Between Plinths and Legs | Pilot Product Parameters with Specific Conditions

Pre-release

• Users can configure wall coving, dado rails and skirting in the application. ² Wall Mouldings | ² Set Up Mouldings

Bug Fixes

• We fixed an issue related to the behavior of rule LightingBOMRule in some edge cases.
• We fixed an issue related to the displayed project price in step 1 that could differ between 2D and 3D views.

Kitchen 2024.7.1

July 22, 2024

What’s New and Improved

Released

• Users can see the text input field automatically activated when clicking on global search or dedicated search.

Released (previously in pre-release)

• Users can view their medias outside of the summary step. View Images

Bug Fixes

• We fixed an issue related to "LighBOMRule" business rule which had a missing connection cord in a specific case.
• We fixed an issue related selected 2D view filter in order to remains it correctly applied after moving products in 2D.
• We put by default the color option to improve the visibility of the products in the front elevation view.
• We fixed several issues to improve the quality of the Front Elevation view (fillers and room objects not selectable, empty room and multi-room management).
• We fixed an issue when the users change a waterfall type in kitchen projects.

Kitchen 2024.7.0

July 15, 2024

What’s New and Improved

Released

• Users can now open projects that have been created via API. ¹ Web Services
• Retailers can now use the Help Center default widget. ¹ Application Distribution | Kitchen Planner Iframe Messages
• Users can see only valid templates in regards to technical elements set in room measurements import. ² Import Room Measurements

Released (previously in pre-release)

• Users are notified of relevant design issues during planning. ¹ Application Distribution | Validate Worktop | Validate Wall panel
• Users can filters the catalogs with a dedicated search bar or through a hierarchy. ¹ Application Distribution - Sort By | ¹ Application Distribution - Filters

Pre-release

• Users can copy/paste products from one project to another. Available Shortcuts

Bug Fixes

• We fixed an issue related to the display of custom worktops joint icon
• We fixed an issue related to a price mismatch that could happen between the 2D and 3D views
• We fixed an issue related to the refresh of the edit panel after replacing an option
• We fixed an issue related to the pricing of projects with wall-edge-strips not linked to a worktop

Kitchen 2024.6.0

June 27, 2024

What’s New and Improved

Released

• Retailers can limit the users to select multiple values for a worktop.
• Users can add annotations in Front Elevation and Top views and see them in 2D Plans. ¹ Application Distribution | ¹ Application Distribution - 2D Plans | ² Set Up Symbols
• Retailers can configure which stores can create 360 renders.
• Retailers can see more information in BOM and ProjectInfo to manage EDI/EGI standard file. Bill of Material - linearType | Project Info - bays

Released (previously in pre-release)

• Users can use new Front Elevation view to design their projects. Front Elevation View
• Users can see new navigation panel to navigate between 2D, 3D, First Person and new Front Elevation view. Navigation Panel
• Users can change the materials and colors of the openings and see more bays parameters. ² Openings

Pre-release

• Users can see the total price in step 1 and the application takes into account the pricing of bays. ¹ Bill of Material - bays
• Retailers can configure the pricing method of risers in Kitchen application. ¹ Business Rules
• Users can view their medias outside of the summary step. View Images

Bug Fixes

• We fixed an issue related to non-visibility of products in 2D Plans if a sub component does not have a geometry.
• We fixed a crash of the planner when running a specific template.
• We fixed an issue to avoid too strict textual search in "Substitutions" step of the template editor.
• We fixed an issue for wallpanel board pricing by taking into account the minimum values (minWidth and minHeight).
• We fixed an issue related to custom wall edge strips which were not linked to existing worktops.
• We fixed a crash in Wall Panel Editor when a product does not have a geometry.
• We fixed an issue related to wall panel and wall edge strip options availability in properties panel.
• We fixed an issue related to position tool which not placed the cabinets correctly.

Kitchen 2024.5.2

May 29, 2024

What’s New and Improved

Released (previously in pre-release)

• Retailers can sell floor and wall covering products. ² Coverings | Functionalities in Floorplan | ¹ Business Rules
• Retailers have lifecycle and isLocked within the InfoRequestedProject iframe message. Kitchen Planner Iframe Messages
• Users can open/close the openings on their project. Openings

Pre-release

• Users can use new Front Elevation view to design their projects. Front Elevation View
• Users can see new navigation panel to navigate between 2D, 3D, First Person and new Front Elevation view. Navigation Panel
• Users can filters the catalogs with a dedicated search bar or through a hierarchy. ¹ Application Distribution - Sort By | ¹ Application Distribution - Filters

Bug Fixes

• We fixed an issue related to numbering and information in 2D Plans which were not correctly visible.
• We fixed an issue related to pricing when a custom wall edge strip is not linked with an existing worktop.
• We fixed an issue related to product sheet which the price and the dimensions were wrong for different products.
• We fixed an issue related to 2D Plans configuration which could be different between the finalize step and the iFrame message.

Kitchen 2024.5.1

May 21, 2024

What’s New and Improved

Released

• Retailers can create templates with resizable cabinets. ² Set Up Templates
• Users can change dynamically unit system in the Kitchen application.

Bug Fixes

• We fixed an issue related to save button which was deactivated when the resolution of the screen is changed.
• We fixed an issue related to plinth option management in the edit properties panel.
• We fixed an issue related to selection behavior when a product is duplicated, it was not selected by default.

Kitchen 2024.5.0

May 2, 2024

What’s New and Improved

Released

• Users can show the depth of cabinets in vectorial and symbolic 2D Plans. ¹ IFrame messaging
• Retailers can see sorted edges for worktop products in ProjectInfos.

Released (previously in pre-release)

• Users can animate multi-selected products Product Animation
• Users can directly download or delete my medias. ¹ Application Distribution | Images and 2D Plans

Bug Fixes

• We fixed an issue related to round ege cut creation for worktop in imperial unit system.

Kitchen 2024.4.1

April 23, 2024

What’s New and Improved

Released (previously in pre-release)

• Users can take HQ Rendering through the new Photo Studio. ¹ Create Images

Bug Fixes

• We fixed an issue related to "ApplyKitchen" business rule in order to properly take into account freeTags.

Kitchen 2024.4.0

April 15, 2024

What’s New and Improved

Released

• Users are notified for the need of worktop support panels. ¹ WorktopSupportPanelsRule
• Retailers can hide the total project price within the planning solutions. ¹ Application Distribution
• Retailers can price their kitchen dynamically based on the products area. ² Set Up the Pricing
• Retailers can use free tags to setup the possible values of product type parameters.
• Users can see new symbolic and vectorial 2D Plans. ² Images and 2D Plans | ² Kitchen Planner Iframe Messages | ² Application Distribution

Pre-release

• Users are notified of relevant design issues during planning. ¹ Application Distribution | Validate Worktop | Validate Wall panel
• Retailers can sell floor and wall covering products. ² Coverings | Functionalities in Floorplan | ¹ Business Rules
• Users can change the materials and colors of the openings and see more bays parameters. ² Openings
• Retailers have lifecycle and isLocked within the InfoRequestedProject iframe message. Kitchen Planner Iframe Messages
• Users can open/close the openings on their project. Openings

Bug Fixes

• We fixed an issue related to the flip functionnality in the Template Editor
• We fixed an issue that made it possible to add expired products from the favorites list
• We fixed an issue related to cut-outs export in some edge cases
• We fixed an issue related to the polished underside of wall-panels in room corners
• We fixed an issue related to catalog filters on paints and tiles
• We fixed an issue related to the slopped ceiling edition in imperial units

Kitchen 2024.3.0

March 11, 2024

What’s New and Improved

Released

• Retailers can launch application with different currencies on a single locale ¹ Application Distribution
• Retailers can configure the dedicated business rule in order to support assembly kit for Kitchen Island to be computed in the BOM. Kitchen Island BOM Rule
• Retailers can override the existing default symbols used within the solution. ¹ Dynamic Branding | Symbol list
• Retailers can use their own Catalog and Product card widgets ¹ Kitchen Planner Iframe Messages

Released (previously in pre-release)

• Users can see the position of front edges on worktop 2D plans. Images and 2D Plans
• Users can polish a specific area on the underside of a worktop and wall panel. ² Parameters for an Operation | Parameters for a Worktop | Parameters for a Wall Panel | Linear Export Information

Pre-release

• Users can animate multi-selected products Product Animation
• Users can directly download or delete my medias. ² Application Distribution | Images and 2D Plans
• Users can take HQ Rendering through the new Photo Studio. ² Create Images

Bug Fixes

• We fixed an issue related to specific plinth compatibility which was not working for cabinets.
• We fixed an issue related to freestanding wall panels which have missing edges during configuration.
• We fixed an issue related to perpendicular wall creation which was not working in the sketcher.
• We fixed an issue related to accessories catalog which were displayed multiple times.
• We fixed an issue related to double cuts for wall panels and worktops which were not added properly.

Kitchen 2024.2.1

February 22, 2024

Bug Fixes

• We fixed an issue related to the replace of microwaves in certain situations
• We fixed an issue related to the edge finish of worktops that sometimes disappeared when loading a project
• We fixed an issue that could lead to an application freeze in case of very large worktop designs

Kitchen 2024.2.0

February 14, 2024

Bug Fixes

• We fixed an issue on polished underside view which had non-required openings display.
• We fixed an issue related to measurements which were activated in room selector layer.
• We fixed an issue related to filters in order to display them correctly when replacing fronts.

Kitchen 2024.1.1

January 24, 2024

Bug Fixes

• We fixed an issue related to project opening which prevented some product rules to initialize correctly.

Kitchen 2024.1.0

January 17, 2024

What’s New and Improved

Released

• Retailers can create the Japan range that requires special fittings for suspension rail ¹ SuspensionRailFittingsRule

Bug Fixes

• We fixed an issue related to cabinet position when the users modify it through position tool.

Kitchen 2023.12.0

December 20, 2023

What’s New and Improved

Released

• Retailers have computedWidth, computedHeight and computedDepth for all products within the BOM. ¹ Bill of Material

Bug Fixes

• We fixed an issue related to plinth replacement which was not applied properly for specific cabinets.
• We fixed an issue related to plinth option management which was not displayed properly for specific cabinets.
• We fixed an issue related to light color management, the options are now displayed properly.
• We fixed an issue related to options display in the edit panel.
• We fixed an issue related to position tool which was not updated correctly for appliances.
• We fixed an issue related to wall selection and avoid a crash in Template Editor.

Kitchen 2023.11.0

November 29, 2023

What’s New and Improved

Released (previously in pre-release)

• Users can position items precisely without magnetization when using the position tool. Editing Products
• Users can see the size of fixtures directly on the floorplan step. Floorplan
• Users can duplicate freestanding worktops and wall panels. Editing Products
• Users are presented with consistent actions on all pop-ins and editors. Kitchen Planner Overview
• Retailers can see which appliances are included in the design within the template editor.

Pre-release

• Users can see the position of front edges on worktop 2D plans. Images and 2D Plans
• Users can polish a specific area on the underside of a worktop and wall panel. ² Parameters for an Operation | Parameters for a Worktop | Parameters for a Wall Panel | Linear Export Information

Bug Fixes

• We improved the "BOMComputationReady" iFrame message behavior in order to take into account an empty project.
• We fixed an issue related to error message display for technical elements.
• We fixed an issue related to cabinet positionning for specific base cabinets (previously inside a wall and collide with other products).
• We fixed an issue related to translation of legal text in information grid which was displayed in millimeter when we are in imperial.
• We fixed an issue related to product information sheet popup in order to take into account generic products and mapping.

Kitchen 2023.10.1

October 16, 2023

What’s New and Improved

Released

• Retailers can configure a depth reduction operation on a worktop. ¹² Parameters for an Operation
• Retailers have enhanced product information within the SpecialProductInfoRequested iframe message and widget. Kitchen Planner Iframe Messages

Released (previously in pre-release)

• Users can split wall panels in the wall panel editor. Split Wall Panel
• Retailers can define product tags as possible values for product material parameters.

Bug Fixes

• We fixed an issue related to wall edge strip display when the cabinet is duplicated.

Kitchen 2023.10.0

October 4, 2023

What’s New and Improved

Released

• Retailers can choose to disable the save project option within the SetUpSettings iframe message. Kitchen Planner Iframe Messages

Released (previously in pre-release)

• Retailers can choose to show the measure tool. ¹ Kitchen Planner Overview | Application Distribution

Bug Fixes

• We fixed an issue related to user information display in case of sign up in template and assembly editors.
• We fixed an issue related to worktop generation with corner cabinets when the user adds other cabinets.
• We fixed an issue related to worktop update which results waterfall generation in precut worktops.
• We fixed an issue related to mapping resolution which taken into account expired products in it.

Kitchen 2023.9.2

September 12, 2023

Bug Fixes

• We fixed an issue related to total price display when we switch from "Finalize" step to "Design" step.

Kitchen 2023.9.1

September 6, 2023

Bug Fixes

• We fixed an issue related to smart scaling feature in data contribution tool.

Kitchen 2023.9.0

September 4, 2023

What’s New and Improved

Released

• Users can disable automatic cover panels. ² Editing Cover Panel | Parameters for a Cabinet
• Retailers have uuid and dbId for all products contained within the project information. ¹ Project Information

Pre-release

• Users can split wall panels in the wall panel editor. Editing Wall Panel
• Users can delete project images in the media widget. Widgets | Application Distribution

Bug Fixes

• We fixed an issue related to pricing issue when the user makes a rounded corner for a custom worktop.

Kitchen 2023.8.1

August 29, 2023

What’s New and Improved

Released

• Users are presented with matching products. ¹ Matching Products
• Users can import sloped ceiling information with room measurements. ¹ Floorplan | Application Distribution | Configure the Measurement Service

Released (previously in pre-release)

• Users can see the current product displayed at the top of the edit panel. Editing Cabinets
• Retailers can choose how the catalogue interacts after a user inserts a product. ¹ Design Your Kitchen | Application Distribution

Pre-release

• Users can position items precisely without magnetization when using the position tool. Editing Products
• Users can see the size of fixtures directly on the floorplan step. Floorplan
• Users can duplicate freestanding worktops and wall panels. Editing Products
• Retailers can see which appliances are included in the design within the template editor.
• Retailers can define product tags as possible values for product material parameters.

Bug Fixes

• We fixed an issue related to the animation of assembly components that could be rotated wrongly in some cases.
• We fixed an issue related to the inconsistent behavior of windows & doors position measures in imperial units.
• We fixed an issue related to the edit panel that could get stuck in some cases when replacing the plinth.
• We fixed an issue related to the display of min and max values of the wall-panel height in imperial system.
• We fixed an issue related to the legend display toggle in the wall-panel editor.
• We added security fixes for recent vulnerabilities.

Kitchen 2023.8.0

August 1, 2023

What’s New and Improved

Released

• Users can delete expired products if there are no replacements proposed.

Bug Fixes

• We fixed an issue related to cover panel replacement where the pricing was not up to date following the replacement operation.
• We fixed an issue related to free shapes which were not customizable with materials. It is now enabled again.

Kitchen 2023.7.2

July 24, 2023

What’s New and Improved

Released

• Users are notified if the project description exceeds the maximum allowed characters.

Pre-release

• Retailers can choose to show the measure tool. ¹ Kitchen Planner Overview | Application Distribution

Bug Fixes

• We fixed an issue related to translations for height parameter of freestanding wall panel which was not updated correctly.
• We fixed an issue related to Business rules display which all were not displayed correctly in the planner.
• We improved the way we manage the collisions between generic appliances and waterfall.

Kitchen 2023.7.1

July 10, 2023

Bug Fixes

• We fixed an issue related to appliance display in "Pick a layout" step especially for integrated fridges.
• We fixed an issue related to overhang values which were not changed when turning on/off waterfall product.

Kitchen 2023.7.0

July 4, 2023

Bug Fixes

• We fixed an issue related to the business rule named "CutOut and Cut to End of worktop" in order to cover all the scenarios.
• We fixed an issue related to quantity computation in the Bill Of Materials for linear products.

Kitchen 2023.6.1

June 21, 2023

Bug Fixes

• We fixed an issue related to precise positionning in imperial unit.
• We fixed an issue related to measurement display in 2D Plans.

Kitchen 2023.6.0

June 14, 2023

What’s New and Improved

Released (previously in pre-release)

• Users have an enhanced experience when changing paint and coverings. Coverings | Functionalities in Floorplan
• Retailers can display a price range of the project. ¹ Design Your Kitchen | Application Distribution | Kitchen Planner Iframe Messages (response) | Kitchen Planner Iframe Messages (request)

Pre-release

• Users can see the current product displayed at the top of the edit panel. Editing Cabinets
• Retailers can choose how the catalogue interacts after a user inserts a product. ¹ Design Your Kitchen | Application Distribution

Bug Fixes

• We fixed an issue related to translations ionn information grid of 2D Plans.
• We improved logo quality of the retailers displayed on information grid of 2D Plans.
• We fixed an issue related to a business rule which manages full depth sink.

Kitchen 2023.5.1

May 31, 2023

Bug Fixes

• We fixed an issue related to full depth sink management when its orientation is reversed.
• We fixed an issue related to sink cutout and drainer groove which is not managed properly and raised an error in the help center.
• We fixed an issue in save project when a sink is larger than the worktop board.
• We improved the behavior of worktop edge management after worktop split operation.
• We fixed an issue related to plinths and legs management in the case where a plinth has been changed.
• We fixed an issue related to error message for wrong dimension values which displays a wrong unit system.
• We fixed an issue related to wrong total price when the user opens an existing project with hinges contained in the cabinets.

Kitchen 2023.5.0

May 22, 2023

What’s New and Improved

Released (previously in pre-release)

• Users are presented with an information grid for 2D plans and images. ¹ Images and 2D Plans
• Users are presented with correctly orientated top view and worktop 2D plans. Images and 2D Plans
• Retailers can apply automatic groups and symmetry within the template editor.

Bug Fixes

• We fixed an issue related to customized product in case where the user has a top mounted sink in his project.
• We fixed an issue related to incorrect hinges products in the Bill of Materials when a door is removed in the project.
• We fixed an issue when the user re-opens a project containing freestanding worktops with specific edge finish configuration.

Kitchen 2023.4.2

April 24, 2023

What’s New and Improved

Released

• Users can apply multiple cornice to cabinets. ² Editing Cornice | Parameters for a Cabinet | Parameters for a Cornice | Parameters for a Riser

Released (previously in pre-release)

• Users can see 2D plan dimensions without the unit system. Images and 2D Plans | Types of 2D Plans
• Users can replace an edited wall panel without loosing compatible items. Editing Wall Panel
• Retailers can configure double-fronted cabinets to avoid placement against a wall. ² Adding Cabinets
• Retailers can apply automatic groups and symmetry within the template editor.

Pre-release

• Retailers can display a price range of the project. ¹ Design Your Kitchen | Application Distribution | Kitchen Planner Iframe Messages (response) | Kitchen Planner Iframe Messages (request)

Bug Fixes

• We fixed an issue related to cross button in the popin for save project.
• We added warning message when unsupported file is loaded for import floorplan.
• We fixed an issue related to dimension precision for Business Rules checks.
• We fixed an issue related to configuration of edge finishes during worktop replacement.
• We fixed an issue related to Business rule which checks the distance between a cutout and other operation.
• We improved the behavior of back plinths when the user adds freestanding cover panel on the back of a cabinet.
• We fixed an issue related to the "Show more" button which was not working in search mode.

Kitchen 2023.4.1

April 12, 2023

What’s New and Improved

Released

• Retailers can configure the joint product for each type of waterfall joint. ² Set Up Worktop | Parameters for a Worktop | Waterfall

Bug Fixes

• We fixed an issue related to wrong format of print page name.

Kitchen 2023.4.0

April 4, 2023

What’s New and Improved

Released

• Retailers have projectInfo and manualNotes contained within the SaveStarted iframe message. Kitchen Planner Iframe Messages

Bug Fixes

• We fixed an issue related to adjoining cabinets which were not visible properly in some cases in the cabinet editor.
• We fixed an issue related to dimensions display in 2D Plans.
• We improved the snap behavior for wall panels when the user snaps a wall panel with another one.
• We fixed an issue related to worktop overhang management when the user added freestanding cover panel.
• We fixed an issue related to cabinet placement when the distance between two cabinets is less than 20 mm.
• We fixed an issue related to wrong edge symbol display in some cases in the worktop editor.

Kitchen 2023.3.0

March 15, 2023

What’s New and Improved

Released (previously in pre-release)

• Users are presented with the room shape pop-in when launching the solution and creating a new project. Change Room Shape
• Users can change the project name within the Summary step. Summary
• Users can see visual improvements of high quality images.

Pre-release

• Users can replace an edited wall panel without loosing compatible items. Editing Wall Panel
• Users are presented with correctly orientated top view and worktop 2D plans. Images and 2D Plans

Bug Fixes

• We fixed an issue related to worktop overhang management in case where the user has half tall unit in his project.
• We fixed an issue related to worktop editor especially if the user creates an auto intersection with edge cut manipulation.
• We fixed an issue related to plinth generation with freestanding wall panels on top of the cabinets.

Kitchen 2023.2.1

February 27, 2023

What’s New and Improved

Released (previously in pre-release)

• Users can adjust the floor elevation. Floor Height

Pre-release

• Users are presented with an information grid for 2D plans and images. ¹ Images and 2D Plans
• Retailers can configure double-fronted cabinets to avoid placement against a wall. ² Adding Cabinets
• Users are presented with consistent actions on all pop-ins and editors. Kitchen Planner Overview
• Retailers can apply automatic groups and symmetry within the template editor.

Bug Fixes

• We fixed an issue related to 2D plans where multiple dimensions where displayed for L shape kitchen.
• We fixed an issue related to translations for room shape popin displayed at the start of the application.
• We improved the behavior between two cabinets which had distance inferior to 20 mm.
• We fixed an issue related to bad identification of worktop edges in the worktop export for manufacturing.

Kitchen 2023.2.0

February 1, 2023

What’s New and Improved

Released (previously in pre-release)

• Users can drag and drop items in the cabinet editor. Composing a Cabinet
• Retailers are advised why there are no proposals when testing a template.

Bug Fixes

• We fixed an issue related assembly update in order to prevent missing components in the item list.
• We improved the external price engine in order to cover expired and priceless products in the Bill of Materials.
• We fixed an issue related to custom worktop computation in order to prevent crash when a worktop contains waterfall and rounded / inverted corner cuts.

Kitchen 2023.1.1

January 25, 2023

What’s New and Improved

Released (previously in pre-release)

• Users are presented with "Apply to all" as the default option. Editing Cabinets | Editing Appliances | Editing Worktops | Editing Wall Panel | Coverings
• Users can see the position of adjoining cabinets in the cabinet editor. Editing Cabinets

Pre-release

• Users are presented with the room shape pop-in when launching the solution and creating a new project. Change Room Shape
• Users can change the project name within the Summary step. Summary
• Users can see 2D plan dimensions without the unit system. Types of 2D Plans
• Users can see visual improvements of high quality images.

Bug Fixes

• We fixed an issue related to cut detection especially the case where the user has cut-out inside a double cut.
• We fixed an issue related to wall panel deletion behavior especially when the user has wall panel on filler.
• We fixed an issue related to worktop editor manipulators to improve the joint move over a cutout.
• We fixed an issue related to automatic filler behavior which was not properly disabled when it is disabled.
• We improved wall panel management especially for automatic joint computation.

Kitchen 2023.1.0

January 3, 2023

What’s New and Improved

Released

• Retailers can specify the ordering of the filters list. ¹ Application Distribution | Application Distribution

Bug Fixes

• We fixed an issue related to 2D plans that were sometimes duplicated.
• We fixed an issue related to special characters escaping in the project name.
• We fixed an issue related to the eco-fee computation for large pieces of worktops.
• We fixed an issue related to the multi-replace feature which presented too few options.
• We fixed an issue related to free-standing wall-panel material replacement.
• We fixed an issue related to side wall-panels that were not editable.

Kitchen 2022.12.2

December 15, 2022

Bug Fixes

• We fixed an issue related to pricing of edge finishes which was not working when the Bill of Materials is computed.

Kitchen 2022.12.1

December 13, 2022

What’s New and Improved

Released

• Retailers can disable the price in the product sheet widget. ¹ Widgets | Application Distribution

Bug Fixes

• We fixed an issue related to project name that did not consider several special characters.
• We fixed an issue related to "Rendering in progress" image which was not displayed in several conditions.

Kitchen 2022.12.0

December 5, 2022

What’s New and Improved

Released (previously in pre-release)

• Retailers are presented with the product sheet widget as the default option. ¹ Widgets | Application Distribution

Pre-release

• Users can adjust the floor elevation. Floor Height

Kitchen 2022.11.2

November 28, 2022

What’s New and Improved

Pre-release

• Users can drag and drop items in the cabinet editor. Editing Cabinets

Kitchen 2022.11.1

November 21, 2022

What’s New and Improved

Released

• Retailers can configure cabinets to have only a front plinth. ¹ Plinth Parameters

Pre-release

• Users have an enhanced experience when changing paint and coverings. Coverings | Features in Floorplan

Bug Fixes

• We fixed an issue related to item notes display in print state.
• We fixed an issue related to decorate products which were added bigger after each insertion.
• We fixed an issue related to obstacle position when the project is loaded.
• We fixed an issue related to wall panels with two double corner cuts which caused wrong pricing computation.

Kitchen 2022.11.0

November 9, 2022

What’s New and Improved

Released (previously in pre-release)

• Users can zoom to a specific item. Specific Zoom
• Users can duplicate elements in one click within the cabinet editor. Composing a cabinet
• Users can see a consolidated legend when in linear editors. Editing Worktop | Editing Wall Panel
• Users have automatic fillers applied between a cabinet and a free shape. ² Editing Filler
• Users can replace one cabinet for multiple cabinets which fit the same space. ¹ Replacing with multiple cabinets

Pre-release

• Users can see the position of adjoining cabinets in the cabinet editor. Editing Cabinets
• Users are presented with "Apply to all" as the default option. Editing Cabinets | Editing Appliances | Editing Worktops | Editing Wall Panel | Coverings
• Retailers are advised why there are no proposals when testing a template.

Bug Fixes

• We fixed an issue related to the consideration of the sloped ceiling in the templates.
• We fixed an issue relate to unit price display in the planner.
• We fixed an issue related to bad display in 3D View especially on wall representation for mobile version.
• We fixed an issue related to wrong price display in "Finalize" step for mobile version.
• We fixed an issue related to print button which did not work properly for mobile version.
• We fixed an issue related to expired product feature.
• We fixed an issue related to edge finish compatibility algorithm in order to avoid application crash in particular cases.
• We fixed an issue in the product sheet widget in order not to show the price for worktop products.
• We fixed an issue related to front edge management in worktop editor.
• We fixed an issue related to Business Rule which checks the case where a cabinet is placed close to the wall.

Kitchen 2022.10.3

October 25, 2022

Bug Fixes

• We fixed an issue related to the worktop export feature.

Kitchen 2022.10.2

October 19, 2022

What’s New and Improved

Released (previously in pre-release)

• Retailers can configure worktops and wall panels to automatically update to the correct edge. ² Editing Worktop | Editing Wall Panel
• Users can apply multiple substitutions to a cabinet within the template editor.

Pre-release

• Retailers are presented with the product sheet widget as the default option. ¹ Widgets | Application Distribution

Bug Fixes

• We fixed an issue related to HTAccess which appeared in Finalize step on mobile solution.
• We fixed an issue related to error message display in imperial unit system.
• We improved the consistency of the shared information between Bill of Materials and manufacturing export file.
• We fixed an issue related to dimensions display of the position tool.
• We fixed an issue related to parameter and relation management in Assembly Editor.

Kitchen 2022.10.1

October 6, 2022

Bug Fixes

• We fixed an issue related to the elevate manip when there are no rooms in the project.

Kitchen 2022.10.0

October 3, 2022

What’s New and Improved

Released

• Users are presented with results including special characters.

Released (previously in pre-release)

• Users can decorate free shapes with paint and materials. ² Set Up Material | Paint and Flooring

Bug Fixes

• We fixed an issue related to level management when the user opens an existing project.

Kitchen 2022.9.1

September 26, 2022

What’s New and Improved

Released (previously in pre-release)

• Users can see item outlines in the 2D view.

Pre-release

• Users can replace one cabinet for multiple cabinets which fit the same space. ¹ Replacing with multiple cabinets

Bug Fixes

• We fixed an issue related to replace cabinet which caused an overlap of cabinets.
• We fixed an issue related to cabinet positioning with small distances.

Kitchen 2022.9.0

September 6, 2022

What’s New and Improved

Released

• Users are prompted to confirm closure of template editor if they have unsaved changes.

Released (previously in pre-release)

• Users can insert freestanding wall panels. ² Editing Wall Panel
• Retailers can configure automatic front edges in the worktop editor. ¹² WorktopFrontEdgeRule

Pre-release

• Users can zoom to a specific item. Specific Zoom
• Users can duplicate elements in one click within the cabinet editor. Composing a cabinet
• Users can see a consolidated legend when in linear editors. Editing Worktop | Editing Wall Panel
• Users have automatic fillers applied between a cabinet and a free shape. ² Editing Filler
• Retailers can configure worktops and wall panels to automatically update to the correct edge. ² Editing Worktop | Editing Wall Panel
• Users can apply multiple substitutions to a cabinet within the template editor.

Bug Fixes

• We fixed an issue related to unit display with the first person view in US.
• We fixed an issue related to the corner fillers behavior in angled open rooms.

Kitchen 2022.8.4

August 25, 2022

Bug Fixes

• We fixed an issue related to the worktop option panel displaying a password prompt.

Kitchen 2022.8.3

August 22, 2022

What’s New and Improved

Released

• Retailers can configure product dimensions in the product sheet widget. ¹ Application Distribution | Widget

Released (previously in pre-release)

• Retailers can configure the type of waterfall joint per worktop. ² Set Up Worktop | Parameters for a Worktop | Waterfall

Pre-release

• Users can decorate free shapes with paint and materials. ² Set Up Material | Paint and Flooring

Bug Fixes

• We fixed an issue related to text collision in 2D plans measurements
• We fixed an issue related to snap points on the z-axis for products with the OnWall behavior
• We fixed an issue related to the display of room measures in open kitchens
• We fixed an issue related to the help center display for specific use cases with rounded corner cuts
• We fixed an issue related to the display of plinths after using the position tool on multiple selection
• We fixed an issue related to the behavior of OnCeiling target position
• We fixed an issue related to the camera positionning when switching too fast between 3D and 2D view
• We fixed an issue related to the display of min value in some applicative rules
• We fixed an issue related to corner fillers altitude during drag and drop

Kitchen 2022.8.2

August 15, 2022

What’s New and Improved

Released

• Retailers can configure a secondary currency within the BOM. ¹² Application Distribution | Bill of Materials

Kitchen 2022.8.1

August 4, 2022

What’s New and Improved

Pre-release

• Users can see item outlines in the 2D view.

Bug Fixes

• We fixed an issue related to the behavior of some app-distribution settings. Application Distribution

Kitchen 2022.8.0

August 2, 2022

What’s New and Improved

Released (previously in pre-release)

• Users can see corner angles in the worktop and wall panel editors.
• Users creating a 3D render have their view automatically adjusted to show the entire project. Create Images

Pre-release

• Retailers can configure automatic front edges in the worktop editor. ¹² WorktopFrontEdgeRule

Bug Fixes

• We fixed an issue related to wall panel modifications which hang application in several scenario.

Kitchen 2022.7.1

July 26, 2022

Bug Fixes

• We fixed an issue related to the display of catalog filters in columns.
• We fixed an issue related to the product rules of typeId 1 (compatibility rules).

Kitchen 2022.7.0

July 13, 2022

What’s New and Improved

Released

• Retailers can configure additional mappings for products. ² Generic Products

Released (previously in pre-release)

• Users can experience the solution using a mobile device.
• Users are notified about the location of the help center when entering the Design step for the first time. ¹ Application Distribution | Design your Kitchen
• Users can create notes on linears. Kitchen Planner Overview | Bill of Materials | Linear Export Information

Pre-release

• Users can insert freestanding wall panels. ² Editing Wall Panel

Bug Fixes

• We fixed an issue related to back panel which disappeared while adding a wall cabinet in template editor.

Kitchen 2022.6.2

June 22, 2022

What’s New and Improved

Pre-release

• Retailers can configure the type of waterfall joint per worktop. ² Set Up Worktop | Parameters for a Worktop

Bug Fixes

• We fixed an issue related to worktop display when the user modify the worktop with an angled cutout.

Kitchen 2022.6.1

June 15, 2022

What’s New and Improved

Released (previously in pre-release)

• Users can insert freestanding worktops with default dimensions. ² Editing Worktop

Pre-release

• Users can see corner angles in the worktop and wall panel editors.
• Users creating a 3D render have their view automatically adjusted to show the entire project. Create Images

Bug Fixes

• We fixed an issue when the user clicks on HQ image after reopening a project.
• We fixed an issue when the user sets wall panel height to 0 mm.

Kitchen 2022.6.0

June 8, 2022

What’s New and Improved

Released (previously in pre-release)

• Users can delete the entire contents of their project, while keeping all wall measurements and fixtures. Design Your Kitchen

Pre-release

• Users can experience the solution using a mobile device.

Bug Fixes

• We fixed an issue related to a business rule which checked distance between sink and front of the worktop.
• We fixed an issue related to translations for waterfall type.

Kitchen 2022.5.1

May 30, 2022

What’s New and Improved

Released (previously in pre-release)

• Users can delete wall panels in the wall panel editor. Editing Wall Panel

Bug Fixes

• We fixed an issue related to the update of the component of the product when changing the parameter value in the cabinet editor.
• We fixed an issue related to the incompatible edges which are not removed when replacing the worktop material.
• We fixed an issue that the wall panel option is visible when the cabinet is not against the wall and its worktop is extended to the wall.
• We fixed an issue related to when a joint and a cut is in the same position.

Kitchen 2022.5.0

May 9, 2022

What’s New and Improved

Released

• Retailers can choose to notify users of broken business rules when entering or when clicking the proceed button on the Summary step. ¹ Application Distribution
• Retailers can choose to allow modification of cabinet dimensions (width, depth and height). ²

Bug Fixes

• We fixed an issue regarding the Edge Finish business rule which ignored the rounded corner edges.
• We fixed the behavior related to joints when the user drag ends on another joint.
• We fixed an issue when applying multiple paints to the wall which caused a malfunction of the 3D View.
• We fixed and issue related to 2D plans which caused crash when printing these 2D plans.

Kitchen 2022.4.4

April 27, 2022

What’s New and Improved

Pre-release

• Users are notified about the location of the help center when entering the Design step for the first time. ¹ Application Distribution | Design your Kitchen

Bug Fixes

• We fixed an issue related to freestanding filler which was added without back cover panel when placed at the center of the room.

Kitchen 2022.4.3

April 25, 2022

What’s New and Improved

Released

• Retailers can choose to disable the removal of back plinth. ¹ Editing Plinth | Application Distribution
• Retailers can choose between high quality and 3D renders as a default. ¹ Create Images | Application Distribution

Released (previously in pre-release)

• Users can import room measurements without removing items within the project. Floorplan | Application Distribution | Configure the Measurement Service
• Users can easily move and position objects on the wall and on top of other objects.

Pre-release

• Users can create notes on linears. Kitchen Planner Overview | Bill of Materials | Linear Export Information
• Users can delete wall panels in the wall panel editor. Editing Wall Panel

Bug Fixes

• We fixed multiple usability issues when using the planner on a mobile device.
• We fixed an issue related to the 3D plan import from laser measurement devices.
• We fixed an issue related to customized products being invisible in some cases.
• We fixed an issue related to the price that was not updating in Template Editor.
• We removed a useless 1mm gap after inserting a product near a free shape.
• We fixed an issue related to the positioning of a manual cover panel between two cabinets that was impossible without collisions.
• We fixed an issue related to the default grain direction of automatic waterfall boards.
• We fixed an issue related to the pricing of waterfall boards joints.

Kitchen 2022.4.2

April 20, 2022

Bug Fixes

• We fixed an issue related to template position in the Design step.

Kitchen 2022.4.1

April 14, 2022

Bug Fixes

• We fixed an issue where customized products from cabinet editor were not displayed correctly in the application.

Kitchen 2022.4.0

April 11, 2022

What’s New and Improved

Released

• Users are notified if worktops or wall panels dimensions are under the minimum values allowed. ² Worktop Minimum Dimension
• Users can add items to their project from the product sheet widget. Product Information Pop-in | Widgets | Application Distribution
• Retailers can optimize island side panels when calculating the price. ² Editing Cover Panel
• Retailers can differentiate if a single cut is part or full depth. ¹² Parameters for an Operation | AB Dimensions for a Single Cut | AB Dimensions for a Single Cut of Wall Panel

Released (previously in pre-release)

• Users can upload a 2D floorplan. ¹ Upload 2D Floorplan
• Users can replace an edited worktop without loosing compatible items. Editing Worktop | Application Distribution
• Users are presented with all room shapes in the same pop-in. ¹ Change Room Shape
• Users can decorate walls and floors easier. ² Paint and Flooring
• Retailers can disable download actions in the media widget. ¹ Widgets | Application Distribution
• Users can see when a render is pending. ¹ Images and 2D Plans

Pre-release

• Users can delete the entire contents of their project, while keeping all wall measurements and fixtures. Design Your Kitchen

Bug Fixes

• We fixed an issue related to product options which are visible whereas they are not editable.
• We fixed an issue related to translation which are missing for some filters.
• We fixed an issue related to the global style value which is not applied on parameters in cabinet editor.
• We fixed an issue related to worktop operations which were always visible even if the new chosen worktop is not compatible.
• We fixed an issue related to the edges which were changed to default after changing the colour of the same type of worktop material.
• We fixed an issue related to front and inside views display when the user clicks on print for the second time.
• We fixed an issue related to waterfall grain direction display when creating an island.
• We fixed an issue related to the pricing of the quartz operations.
• We fixed an issue related to the cover panel manipulation when it is placed between cabinets.

Kitchen 2022.3.0

March 1, 2022

What’s New and Improved

Released

• Users have enhanced zoom within the worktop, wall panel and wall edge strip editors.
• Users have additional snap points within the worktop and wall panel editors.
• Users are notified if a worktop or wall panel has a split that is not required. ¹ Worktop Split Edge | Wall Panel Split Edge

Released (previously in pre-release)

• Users are presented with accurate wall panels dimensions when positioned in room corners.
• Users are notified of wall panels collision when positioned in room corners. ¹ Wallpanel Overlap

Bug Fixes

• We fixed an issue related to wall disappearance when importing file from import measurement tool.

Kitchen 2022.2.0

February 16, 2022

What’s New and Improved

Released

• Users are notified if the worktop front edge is not aligned with the grain direction. ¹ Grain Direction and Front Edge Compatibility
• Users see more relevant results for multi-word search queries.

Bug Fixes

• We fixed an issue related to a wrong refresh when the user adds non-3D accessories in the project.
• We fixed an issue related to the HQ Rendering display in finalize step.
• We fixed an issue related to the description display for custom worktops.
• We fixed an issue related to the room type naming which was wrongly translated.
• We fixed an issue related to the back plinth which was not disabled when colliding with a freestanding cover panel.

Kitchen 2022.1.0

January 24, 2022

What’s New and Improved

Released

• Users are notified when entering a large measurement into the position tool. ¹ Editing Products
• Users are presented with the same side cabinet when replacing a corner cabinet. ² Search Filter
• Users are presented with error screens if the solution cannot load. Getting Started
• Retailers can configure the waterfall inset per worktop. ² Parameters for a Worktop

Pre-release

• Users can upload a 2D floorplan. ¹ Upload 2D Floorplan
• Users can replace an edited worktop without loosing compatible items. Editing Worktop
• Users can import room measurements without removing items within the project. Floorplan | Application Distribution | Configure the Measurement Service
• Users are presented with all room shapes in the same pop-in. ¹ Change Room Shape
• Users can decorate walls and floors easier. ² Paint and Flooring
• Retailers can disable download actions in the media widget. ¹ Widgets | Application Distribution
• Users can see when a render is pending. ¹ Images and 2D Plans
• Users can easily move and position objects on the wall and on top of other objects.

Bug Fixes

• We fixed an issue related to favourites list which was impossible to delete certain products in the list.
• We fixed an issue related to rotation command in the position tool.
• We fixed an issue related to the "Apply to all" rule for half high cabinets when they are placed on the same linear with base cabinets.
• We fixed an issue related to the worktop joint symbol which remained visible after its deletion.
• We fixed an issue related to incorrect worktop dimensions in case of automatic filler for a non 90 deg room angle.
• We fixed an issue related to incorrect measurement between cabinets when using the worktop editor.
• We fixed an issue with HBM Connect on Safari browser.
• We fixed an issue related to the item list when the user removes all worktops in the project (beta).
• We fixed an issue related to the "Show images" pop-up which was displayed even if there is no HQ Render.
• We fixed an issue related to the openings insertion (drag and drop) which is now work correctly.
• We fixed an issue related to a specific locale which was not displayed properly the range when the user start planning from scratch.
• We fixed an issue related to the calculation of eco-fee.
• We fixed an issue related to the cabinet component height when adjusting legs.
• We fixed an issue related to the decostrip display when the user has a wall cabinet attached to a square column.

Kitchen 2021.12.0

December 14, 2021

What’s New and Improved

Released

• Users are notified if items are colliding with room fixtures. ¹ Collision with Openings

Pre-release

• Users can insert freestanding worktops with default dimensions. ² Editing Worktop

Bug Fixes

• We fixed an issue when we change parameters of a cabinet which do not update its bounding box in template editor.
• We fixed an issue for the business rule related to the minimum distance between linears which popped for incorrect reasons.
• We fixed an issue related to wall panel in corner with 90 degrees angles because incorrect side of wall panel was reduced.
• We fixed an issue related to the rotation of front edge symbol for incorrect reasons.
• We fixed an issue related to the price computation by an external module which was not available.
• We fixed an issue related to worktops dimensions which were not adjusted correctly when maximum values are exceeded.
• We fixed an issue with "LoadProject" iFrame message which provided troubles with losing project.

Kitchen 2021.11.0

November 29, 2021

What’s New and Improved

Released

• Users are presented with the unit measurement before the measurement value for Arabic and Chinese languages.
• Retailers can create generic plinths and wall edge strips. ² Set Up Plinth | Set Up Wall Edge Strips
• Retailers can access additional project information. ¹ Kitchen Planner Iframe Messages

Pre-release

• Users are presented with accurate wall panels dimensions when positioned in room corners.
• Users are notified of wall panels collision when positioned in room corners. ¹ Wallpanel Overlap

Bug Fixes

• We fixed an issue with move controls when selecting/deselecting toggles under the Position section.
• We fixed an issue related to filler generation when the walls are extended.
• We fixed an issue regarding the behavior with left and right cover panels.
• We fixed an issue related to the undo feature with filler piece.
• We fixed an issue in the item list which contained remaining worktop objects after removing all the worktops in the project.
• We fixed an issue related to the dimensions of overhang which were not updated correctly after changing worktop material.

Kitchen 2021.10.1

October 20, 2021

Bug Fixes

• We fixed an issue with unit translations in order to fallback in the correct language.
• We fixed an issue in order to apply only active product rules (not marked as deleted) on products.
• We fixed a rounding issue on the measurement tags.
• We fixed an issue related to the generation of asymmetrical worktops with waterfalls.
• We fixed an issue regarding the "Worktop overhang size" business rule.
• We fixed an issue related to the position of sink cut-out in the worktop editor.
• We fixed an issue related to cut out move in worktop editor.
• We fixed an issue regarding the automatic filler which disappeared after removing and restoring a cabinet.
• We fixed an issue regarding the limitation of parameters A and B in slopped ceiling editor.
• We improved the behavior of maximum and minimum dimensions of freestanding worktops.
• We fixed an issue in order to display wall cabinets without fronts in the wall panel editor.
• We fixed an issue regarding plinth collision with wall cabinets.
• We fixed an issue with waterfalls on replace worktop product.
• We improved the behavior of snapping products with other ones.

Kitchen 2021.10.0

October 5, 2021

What’s New and Improved

Released (previously in pre-release)

• Users have an enhanced experience within the Summary step, showing clear information about delivery, installation, finance and more. Summary | Summary Step Configuration | Application Distribution | Application Distribution

Bug Fixes

• We fixed an issue when the user deletes a wall panel with delete button.
• We fixed an issue related to duplicate freestanding worktop when the project is reopened.

Kitchen 2021.9.0

September 20, 2021

What’s New and Improved

Released

• Retailers can configure the solution to request front view 2D plans without fronts. ¹ 2D Plan Information | Kitchen Planner Iframe Messages
• Retailers can disable the item list. ¹ Application Distribution | Kitchen Planner Overview | Summary
• Retailers can disable print actions. ¹ Application Distribution | Kitchen Planner Overview | Summary
• Retailers are provided with German translations (Hallo!) as part of the solution. Localizing Application

Released (previously in pre-release)

• Users can insert and position an item with increased productivity due to it being selected after insertion. Design Your Kitchen
• Users are presented with tips on how best to use the position tool. Design Your Kitchen
• Retailers translations show in the same input case as provided.

Bug Fixes

• We fixed an issue when the user manipulates the edges of the worktop in particular scenarios.
• We fixed an issue in 2D plans computation, some 2D plans were cut in the layer in particular cases.
• We fixed an issue in 2D plans computation when the worktop is correctly configured.
• We fixed an issue with the logo on the loading screen which appeared in the wrong case.
• We fixed an issue when the user selects a non-product element before the animation is finished.
• We fixed an issue related to import measurements when the project is saved.
• We fixed an issue in export worktop info when the worktop is too large.
• We fixed an issue related to filler and worktop which are not selectable in particular cases.
• We fixed an issue related to import measurements and ceiling height update.
• We fixed an issue related to horizontal doors on top of regular door.
• We fixed an issue related to wall panel when the user has angled walls in the room.
• We fixed an issue in import measurements when the imported file is valid.
• We fixed an issue for worktop and wall panel display when the user opens a project in a new tab.
• We fixed an issue when the user places two cabinets on each other.

Kitchen 2021.8.3

August 30, 2021

Bug Fixes

• We fixed incorrect behavior of measurement input boxes for imperial measurements.
• We fixed an issue with the floor when adding multiple doors/windows.
• We avoided a crash situation with wall panels when dragging over a wall opening.
• We improved alignment of zoom buttons when using the solution in RTL.
• We improved the bounding box calculations after updating the position of an element.
• We fixed an issue relating to the selection of accessories in the template editor.

Kitchen 2021.8.2

August 16, 2021

What’s New and Improved

Released (previously in pre-release)

• A branded screen is presented to the user while the application is loading. Loading Screen
• Users are presented with tabs in the main navigation. Solution Layout
• Users can create rounded worktop cuts by entering the depth. Adding Edge Cut

Kitchen 2021.8.1

August 11, 2021

What’s New and Improved

Released

• Retailers are provided with Arabic translations (أهلا) as part of the solution. Localizing Application

Bug Fixes

• We fixed a display issue when opening a project with products far from the center of room.
• We fixed the position tool that was not behaving correctly for products rotated by 180°.
• We improved the template contribution web-service to avoid a blocking situation of incomplete deletion.
• We fixed the HobHoodRule business rule that was not behaving correctly in some cases.
• We avoided a crash situation in the business rule WorktopWallUnitDistanceRule.

Kitchen 2021.8.0

August 5, 2021

Bug Fixes

• We fixed an issue related to the HobHoodRule business rule.

Kitchen 2021.7.7

July 28, 2021

Bug Fixes

• We fixed an issue related to the mapping of wall cabinets products.
• We added JSON error response overload to replace nginx html default.
• We improved the behavior of "Item collision" rule which was triggered with cornice attached to a wall cabinet.
• We fixed the viewpoint behavior when the user uses keyboard inside input fields.

Kitchen 2021.7.6

July 26, 2021

What’s New and Improved

Pre-release

• Users can insert and position an item with increased productivity due to it being selected after insertion. Design Your Kitchen
• Users are presented with tips on how best to use the position tool. Design Your Kitchen
• Retailers translations show in the same input case as provided.

Bug Fixes

• We fixed an issue related to snapping points when the user has a custom wall panel.
• We improved the min/max case in Substitutions step of template editor when automatic fillers are added in the scene.
• We fixed the behavior of adding corner cut and edge cut in order to have the correct price of the project.
• We fixed an issue related to dimensions of a wall panel when the user drags the edges.

Kitchen 2021.7.5

July 22, 2021

Bug Fixes

• We fixed an issue for template editor URL embeded in the retailer website.

Kitchen 2021.7.4

July 19, 2021

What’s New and Improved

Released (previously in pre-release)

• Retailers can configure the solution to update the style. ² Apply to Kitchen | Cabinet Style Parametrization
• Users can reset their position in the room. Reset Position

Bug Fixes

• We fixed an issue with sun inclination which was wrongly set after exiting HQ Rendering layer.
• We improved error messages for login issues.
• We improved collisions precision for the manipulators.
• We fixed limit cases for worktop merge.
• We fixed paint and flooring apply when the user has selected another color before.
• We fixed an issue when the user wants to create a item note for automatic filler.
• We fixed an issue when accessing RTL applications.
• We fixed an issue for wall edge strips computation when save or recover project.
• We fixed an issue during price computation when a decostrip product is missing.
• We fixed the behavior when the business rule "Item Position" is triggered.
• We fixed an issue for menu titles being incorrectly displayed in some languages.

Kitchen 2021.7.3

July 13, 2021

Bug Fixes

• We fixed an issue in export worktop when a cabinet is edited in furniture configurator.

Kitchen 2021.7.2

July 12, 2021

Bug Fixes

• We improved error management for import measurement service.
• We fixed an issue in edit properties panel when the user clicks "Delete" for product parameters.
• We fixed the behavior of the loader icon for save project.
• We fixed an issue related to filler piece when the room contains a room seperator.

Kitchen 2021.7.1

July 8, 2021

Bug Fixes

• We fixed an issue for worktop generation when the user clicks "Cancel" in worktop editor.

Kitchen 2021.7.0

July 7, 2021

What’s New and Improved

Released

• Retailers can utilise the standard product sheet widget. ¹ Product Information Pop-in | Widgets | Application Distribution
• Retailers can utilise the standard images and 2D plans widget. ¹ Widgets | Application Distribution
• Retailers are provided with Spanish translations (hola!) as part of the solution. Localizing Application

Pre-release

• Users have an enhanced experience within the Summary step, showing clear information about delivery, installation, finance and more. Summary | Summmary Step Configuration | Application Distribution | Application Distribution
• Users are presented with tabs in the main navigation. Solution Layout

Bug Fixes

• We added "Dryers" and "Washers" for numbering and dimensions in 2D plans.
• We fixed a behavior to check the item notes and manual notes changes before closing the app.
• We fixed the way for style is applied to newly added elements from the cabinet editor.
• We fixed an issue during the application launch when a CSS file is missing.
• We now set the default ceiling material along with the default wall in order to remove many errors in the console.
• We now send the error notification only when having issue during the save project.
• We fixed the behavior when the user removes the sloped ceiling and keep the door in the adjacent wall.
• We fixed the behavior of Product Intruder Rule.
• We fixed the display of the navigation bar when using the solution in RTL.
• We fixed the behavior when the user moves the worktop during dragging.
• We fixed the behavior to triger properly "Corner Double Cut" rule in main viewer and in worktop editor.
• We fixed the behavior of worktop edge when it is againt a high cabinet.
• We improved the behavior of "Wall Unit Alignment" rule in case of high and top cabinets.
• We fixed an issue when adding accessories through favorites list.

Kitchen 2021.6.1

June 8, 2021

What’s New and Improved

Released (previously in pre-release)

• Users can see the correct translations for ArcsConvexConcaveCutRule business rule. ¹ ArcsConvexConcaveCutRule
• If retailers disable "Pick a layout" step then water supply feature is hidden. ¹ Application Distribution
• When the user opens an existing project the design fills as much of the available screen space as possible. Project Zoom

Pre-release

• A branded screen is presented to the user while the application is loading. Loading Screen

Bug Fixes

• We fixed an issue in 2D plans when a sloped ceiling is in the room.
• We fixed the highlight behavior for worktop position rule in worktop editor.
• We fixed a save issue when the user deselects an edge in wall edge strip editor.
• We fixed the behavior of door display for sloped ceiling when the user removes it.
• We fixed incorrect measurements display in bays and obstacles edit menu for Arabic language.
• We fixed the error message and display the value correctly when the user enters a wrong value for wall dimensions.
• We fixed the manipulator behavior when moving joints and edges in worktop editor.

Kitchen 2021.6.0

June 3, 2021

What’s New and Improved

Released

• User can see the information about the double sided product for waterfall board in worktop export. Linear Export Information

Bug Fixes

• We fixed an issue related to specific business rules when the user splits a worktop.
• We fixed a wall panel length issue when the overhang is edited.
• We fixed an issue related to the display of highlighted element for worktop incompatibility rule.
• We fixed an issue related to cutout operations for waterfall when the user replaces it by another material.
• We fixed an issue on worktop position rule when we have custom worktop and wall panel in the same project.

Kitchen 2021.5.3

May 31, 2021

What’s New and Improved

Released

• Retailers is able to produce a 2D plan of only the room. 2D Plan Information

Pre-release

• Retailers can configure the solution to update the style. ² Apply to Kitchen | Cabinet Style Parametrization

Bug Fixes

• We fixed the behavior consistency when the user try to add a door on an existing door for the dishwasher cabinet.
• We fixed error messages for min/max values in imperial unit system.
• We fixed a crash when using round cut during editing worktop.
• We fixed incorrect measurements display for Arabic language.
• We fixed a crash in worktop editor when the user uses CTRL button.
• We fixed an issue in the item list and in the pricing when using LightBOMRule.
• We fixed the 2D plans generation when the project contains custom wall panel.
• We fixed the manipulator display in Arabic language.
• We fixed several business rules when the application is in imperial unit system.
• We fixed several lighting effects in worktop and waterfall editors.
• We fixed an issue related worktop measurements in 2D plans.
• We fixed the worktop measurements display in worktop editor.
• We fixed the eco fee link on replace products.

Kitchen 2021.5.2

May 19, 2021

What’s New and Improved

Pre-release

• Users can reset their position in the room. Reset Position

Bug Fixes

• We fixed the import of the measurements (room name + wall generation) by using measurement service.
• We fixed the position of the highlight of drainer groove when the business rule is triggered.
• We fixed the grain direction behavior when a worktop has an arc on two of its sides.
• We fixed the joint coordinates when there is a waterfall added in the worktop.

Kitchen 2021.5.1

May 12, 2021

What’s New and Improved

Released

• User can see the information about the double sided product in worktop export. Linear Export Information
• Users can ungroup a product set. ² Ungroup Product Set | Ungroupable behavior | Ungroupable behavior through API

Released (previously in pre-release)

• Users can create shaped worktops. ² Set Up Worktop | Parameters for an Operation | Linear Export Information
• Users can see cover panels in the worktop editor. Editing Worktop
• Users can drag and drop items into their project from the catalogue. Adding Cabinets
• Users are presented with updated icons for notes and item list. Layout of Kitchen Planner

Pre-release

• Users can create rounded worktop cuts by entering the depth. Adding Edge Cut

Bug Fixes

• We fixed a crash in linear export caused by missing parameters on a cabinet.
• We fixed the productSheetUrl attribute in the BOM.
• We fixed the visibility and selection of ceiling in step 2 and step 3 after zoom-in.
• We fixed an issue when applying wall panel and wall edge strip through the options of cabinet properties.
• We fixed the behavior of pop-in display for project recovery with proceed of item list.
• We fixed the behavior of save project when save never succeeded.
• We fixed an error in worktop generation when the user clicks on print button.
• We fixed the behavior of project page when the name of the project contains the maximum number of characters.
• Retailers can place the corner filler geometry origin anywhere along the filler board on the right, and notably at the 2 boards intersection.

Kitchen 2021.5.0

May 4, 2021

What’s New and Improved

Released

• Retailers can user their own pricing mechanism. ¹ Kitchen Planner Iframe Messages (response) | Kitchen Planner Iframe Messages (request) | Application Distribution

Pre-release

• When the user opens an existing project the design fills as much of the available screen space as possible. Project Zoom

Bug Fixes

• We fixed an error in the translations for secondary button in the « No template found » pop-in.
• We fixed the visible items behavior in view mode options especially when the user moves an item with the position tool.
• We fixed the behavior of the worktop replace with custom worktop.
• We fixed the behavior of « Wall cabinet placement » business rule for wall corner cabinets.
• We fixed the product information pop-in for products added in favorites tab.
• We fixed a pricing issue for kitchen island with precut worktop.
• We fixed the cross cut images feature which causes an error in the item list when the user added a freestanding fridge.

Kitchen 2021.4.1

April 26, 2021

What’s New and Improved

Released (previously in pre-release)

• Users are presented with cornice when cover panels overlap.
• Retailers can specify up to 20 catalogue filters. ² Using Cabinets | Parameters for a Cabinet
• Retailers can define the insertion height of freestanding worktops. ² Set Up Worktops
• Retailers can define if items are automatically placed on a wall. ² Set Up the Behaviors | Distance From Wall and Obstacle | Distance Between Wall and High Cabinet | Cabinet Vertical Intersection

Released

• Users are notified when an item is outside of the project. ¹ Furniture Outside Room
• Retailers can specify dimensions when defining waterfall products. ¹² Set Up Worktops | Application Distribution
• Retailers can specify which items can be resized in the cabinet editor. ¹² Prepare Products for the Cabinet Editor | Adjustable Elements in Cabinet Editor
• Retailers can set the energy rating of a product conforming to the new standards. ¹² Set Up the Product Card | Application Distribution

Pre-release

• If retailers disable "Pick a layout" step then water supply feature is hidden. ¹ Application Distribution

Bug Fixes

• We fixed the snapping points behavior on position tool.
• We fixed the ceiling in 2D plans which caused the non-visibility of the furniture in the top view.
• We fixed an issue related to split worktop replacement.
• We fixed the selection of wall/floor after using position tool.
• We improved the behavior of apply wall panel and wall edge strip through cabinet properties.
• We fixed the behavior of wall panel options (left and right) when moving in/out of worktop editor.
• We fixed several issues in our business rules to manage correctly imperial units.
• We fixed an issue in the price when adding a rounded corner cut in worktop editor.

Kitchen 2021.4.0

April 6, 2021

What’s New and Improved

Released

• Retailers can specify the minimum distance between an angled hood and the cooktop. ² Distance Between Hob and Hood

Pre-release

• Users can drag and drop items into their project from the catalogue. Using Cabinets

Bug Fixes

• We improved the behaviors of front management for ovens and microwaves in Cabinet Editor.
• We fixed several issues in our business rules to manage correctly imperial units.
• We fixed a pricing issue for templates.
• We fixed the behavior of left and right wall panel options when the user enters / exits in the worktop editor.
• We fixed and error in the rule ProductIntruder in the case where multiples parameters are used.
• We fixed an issue with the price computation between "Choose your favorites" and "Make it yours" steps due to the computation of some apply rules.
• We improved the 2D plans top views in order to display correctly freestanding worktops and coverpanels if there is no cabinet in the room.

Kitchen 2021.3.5

March 30, 2021

What’s New and Improved

Released (previously in pre-release)

• Users can edit multiple items. Design Your Kitchen
• Users can edit/delete doors and windows in 3D view. Floorplan
• Users can remove the edge product of a worktop, wall panel and wall edge strip. ² Editing Worktop | Editing Wall Panel | Editing Wall Edge Strip
• Users can zoom into the room without adjustment of brightness.

Pre-release

• Users are presented with updated icons for notes and item list. Kitchen Planner Overview

Bug Fixes

• We fixed the behavior of the rule which checks the intersection between the products.
• We disabled the computation of Bill of Materials rules in editors (worktop, wall panel).
• We added a missing translation key for illustration product.
• We improved the consistency of the direction recognition for worktop overhag in island case.
• We fixed the incorrect highlights for the rule which checks the collision between cabinets and sloped ceiling.
• We fixed the behavior of replace products to correctly update the fronts and the handles.

Kitchen 2021.3.4

March 23, 2021

Bug Fixes

• We fixed an error in export worktop feature when a sink cutout is touching a worktop edge.
• We fixed an issue in export worktop feature for cutouts, drainer grooves and waterfall joints which now display the correct coordinates.
• We fixed an issue related to the display of product information pop-in.

Kitchen 2021.3.3

March 22, 2021

Bug Fixes

• We fixed an issue for the behavior of apply options in the properties panel especially for appliances.

Kitchen 2021.3.2

March 17, 2021

Bug Fixes

• We fixed an issue for the generation of the shaders which prevented the correct display of the templates in the Pick a layout step as well as the operation of HomeByMe Connect.
• We fixed another problem in templates generation itself which gave incorrect templates with missing cabinets / linears.

Kitchen 2021.3.1

March 15, 2021

What’s New and Improved

Released

• Retailers can configure worktop lights. ² Update BOM for Lighting Products

Pre-release

• Users can see cover panels in the worktop editor. Editing Worktop

Bug Fixes

• Applying wall panel or wall edge strip was removing worktop in some cases.

Kitchen 2021.3.0

March 9, 2021

What’s New and Improved

Released

• Users can remove an arc from a worktop. Editing Worktop
• Users can snap the arc in the worktop editor. Editing Worktop
• Retailers can show additional services in the Summary step.¹ Integrate the Planner to your Website

Pre-release

• Users can create shaped worktops. ² Set Up Worktop | Parameters for an Operation | Linear Export Information
• Users are presented with cornice when cover panels overlap.
• Retailers can specify up to 20 catalogue filters. ² Using Cabinets | Parameters for a Cabinet commercialWidth commercialDepth
• Retailers can define the insertion height of freestanding worktops. ² Set Up Worktops

Bug Fixes

• Fix the management of possible values for materials in edit properties panel
• Fix accessories management when colliding with windows for template propositions
• Improve template engine when it checks if the products are inside the room in order to fix linear positions
• Add tags for resizing the width of sub-elements in cabinet editor
• Fix edit properties panel refresh when applying paint or flooring by selecting another wall/floor
• Improvements on LightProductBOMRule by excluding inactivated components when calculating the light products
• Fix save issue when checking wall panels before generating 2D plans
• Improve the rule which set correctly the distance from hob to hood based on the energyType for hob
• Improve the manufacturing export for drainer grooves size with double sinks
• Fix FullDepthWorktop toogle button after worktop changes
• Improve the management of critical and warning levels for business rules
• Fix NLS issues in the layer of HomeByMe Connect import
• Improve behavior of the rule which check the position of the cabinets with sloped ceiling
• Fix eco-fee link when the card is at the bottom of the screen
• Improve the behavior consistency of the direction recognition for island cabinets

Kitchen 2021.2.3

February 25, 2021

Bug Fixes

• Remove unique constraint on template contribution with mapping

Kitchen 2021.2.2

February 17, 2021

Bug Fixes

• Ensure propertiesPanelOptions are optional in the application settings
• Ensure legHeight parameter is optional, even when the leg parameter is present
• Additional bounding box validation when entering "Pick a layout" step
• Increased robustness of 2D plan creation
• Filter out expired products from the catalog when replacing an expired product
• Removed unnecessary warnings from Help center
• Apply all while replacing expired product using Replace button in rule

Kitchen 2021.2.1

February 15, 2021

What’s New and Improved

Released (previously in pre-release)

• Users are presented with onboarding information when publishing a project to HomeByMe. Summary

Pre-release

• Retailers can define if items are automatically placed on a wall. ¹² Set Up the Behaviors | Distance From Wall and Obstacle | Distance Between Wall and High Cabinet | Cabinet Vertical Intersection

Bug Fixes

• Incorrect warnings regarding minimum distance between linears/worktop for L-shape in template editor
• Automatic worktop intersection when worktop has only 2 edges
• Joints in merge worktops
• Replace expired products pop-in
• Filler update in item notes
• Worktops in item notes
• Fix worktop top views for 2D plans
• Enable the way to add openings through the properties panel of the wall

Kitchen 2021.2.0

February 3, 2021

What’s New and Improved

Released

• Users can edit corner cabinets in the cabinet editor. ² Prepare Products for the Cabinet Editor
• Retailers are provided with French translations (salut!) as part of the solution. Localizing Application
• Retailers set direction parameters in linear pricing methods. ² Set Up the Pricing
• Retailers have additional information available in the export worktop through drainerGrooveDimensions parameter. ¹ Linear Export Information
• Retailers have an additional iframe message to assist with faster saving of projects. ¹ Kitchen Planner Iframe Messages
• Users can see shelves and horizontal boards in cross cut images. Kitchen Planner Iframe Messages

Released (previously in pre-release)

• Users are presented with onboarding information about HomeByMe when choosing to import a project. Floorplan

Pre-release

• Users can edit multiple items. Design Your Kitchen
• Users can edit/delete doors and windows in 3D view. Floorplan
• Users can remove the edge product of a worktop, wall panel and wall edge strip. ² Editing Worktop | Editing Wall Panel | Editing Wall Edge Strip
• Users can zoom into the room without adjustment of brightness.

Bug Fixes

• Fix circulations, substitutions, constraints and test tabs after opening template in template editor
• Added a pop-in for the save a project copy use case
• Avoid potential infinite loop if two worktops share the same cabinet
• Improve notification message for remove selected items
• Correct item notes count when the user changes the room shape
• Modification of the rule with new scenarios for different hoods and hobs (HobHoodRule)

Kitchen 2021.1.1

January 27, 2021

What’s New and Improved

Released (previously in pre-release)

• Users can split and merge worktops in the worktop editor (Entire feature). Editing Worktops
• Users can move worktops after they have been customised. Editing Worktops
• Users can change worktop height from floor in the edit menu. Editing Worktops
• Users can create notes on automatic fillers. Kitchen Planner Overview | Bill of Materials
• Users can insert doors/windows when selecting a wall. Floorplan

Bug Fixes

• Wall edge strip editor improved in case of arc edges exist
• Check for filler added in minimum distance between linears / worktop rule for L-shape templates
• Handle the behavior when selecting a highlighted sub-element in the cabinet composer
• Fix the expired workflow for expired sub-component
• Nomenclature number in BOM
• Worktop operationCompatibility dependency

Kitchen 2021.1.0

January 21, 2021

Bug Fixes

• Handle sub-products transformations of cooktop appliances in cooktop high cabinet rule and cooktop half height cabinet rules
• Filler behavior when the room contains room seperators
• Removed a hardcoded pricing method for FreeStandingFillerStrip as it is no longer used by client
• Handle the case of replacing a custom wall-panel when there is another custom wall-panel in the same linear
• Fix worktop around cooktop rule and cooktop sink rule
• Add a tolerance for checking business rule MaxDistanceBetweenWallAndHighCabinet when moving furniture by position tool
• Fix Apply / Apply to all linear option iwhile replacing wall panel / worktop
• Display correctly Cross Cut Rendering
• Set rotation of the assembly product
• Fix collision detection in cabinet editor
• Display correctly property names for selection of multiple cabinets
• Disable fields when minimum value equals to maximum value for parameter of type length and integer
• Wall panel replacement when replacing automatic worktops
• Path calculation for wall panel and remove wallPanelOption in global style, add decoStripOption and corniceOption in global style
• Avoid potential infinite loop in cabinet editor
• Add filters in the direct catalog accessible by clicking a wall to add openings
• Corrected edit button with fridge appliance
• Multiple options not displayed while replacing wall panel with only one cabinet in the planner
• Add missing translation key for the error message in business rule
• FurnitureIntersectRule not triggered when there is a cover panel clash
• Fix business rules issues when the application is in imperial
• Fix custom wall panel reset for edge cases
• Edit button hidden when no shared settings for selection
• Threshold used to verify wall contacts of back side when the back cover panel is manually disabled
• Message correctly displayed for accessories selection in creation group in worktop editor
• Unit collision business rule fixed when the filler strip and cabinet are in proximity
• Pop-in and error messages are in inches instead of mm in imperial
• Straight filler properly applied in certain cases
• Improve the way to calculate the position of level furnitures in "Pick a layout" step
• worktopThick value for all cabinets corrected - ventilation grill corrected
• Wall edge strip offset in case of closed loop
• Wall edge strip custom default supporting edges
• resetCustomizedLinear pop-in is now displayed
• Multiple wall panel added and front option changed
• Sink/Hob distance from the front of worktop rule improved
• Warning displayed when the user goes to help center through "Open Help Center" link on "Price info" pop-in in case of expired products
• EdgeFinish pricing when worktopFront does not exist
• Radiatior insertion is now in the correct side
• Edit waterfall on freestanding worktops
• Loader issue in catalog browser because of user guided tour solved
• Radiatior has now added inside the room on adding wall or room separator
• Grain direction visualization on waterfall
• Plinth path corrected when having the parameter leftCoverToFloor and rightCoverToFloor
• Thickness for hob and oven cabinet rule is now triggered when using a worktop lower than 3.8 mm
• Expired Products info in Help Center comes under warning and not recommendation
• Re open project which cut-outs corrected in case of the dimensions were not reapplied
• Crash fixed which caused by internal tool
• Distance Between Hob and Hood rule is now triggered correctly on integrated hoods
• Replace wall panel is now displayed correctly
• Added 2 additional Obbs to the corner fillers collide-box to avoid units to fit into them
• MinDistanceOvenAndCornerCabinet rule is now triggered correctly
• Break word on overlay instead of all - fallback all for IE
• Fix a regression caused by resetCustomizedLinear where the style was not updated anymore for worktop material change
• Handle correctly application and distribution data are exported to HBM
• Fix crash in wallpanel editor (if worktop contains an Edge2DCircle)
• Update freestanding worktop position missing when using the measure tool
• Improve the calculation of the distance between two cabinets
• Display correctly panels in Cabinet editor
• Fix the management of save notifications + disabled the save button after the first save, to be consistent with subsequent saves
• Handle correctly back overhangs and fixed the automatic back cover-panel behavior for corner cabinet
• Added the addBackCoverPanel parameter to control the back cover panel thickness for back overhangs
• Improve the check of valid floor plan before switching to other state
• Fix the insertion of wall cabinets on top of an existing base cabinet. The computed position had an offset issue, only visible when the base cabinets has a cover panel on only one side
• Fix replace panel of the cabinet editor
• Improve the calculation of the position of the corner cabinet
• Handle correctly wall edge strip update if not against a wall
• Fix crash in waterfall edition
• Fix worktop sketch when altitude is modified
• Handle correctly wall edge strip custom when applying cuts on the worktop

Kitchen 2020.12.0

December 7, 2020

What’s New and Improved

Released

• Users are notified if worktops are overlapping. ¹ WorktopOverlapRule
• Users are notified if waterfall worktops are colliding with furniture. ¹ WaterfallCollisionRule
• Retailers have Eco-fee pricing available in the BOM and in iframe message. ¹ Kitchen Planner Iframe Messages
• Users can close the layer if choosing to import a project from HomeByMe.

Pre-release

• Users can insert doors/windows when selecting a wall.
• Users are presented with onboarding information about HomeByMe when choosing to import a project. Floorplan
• Users are presented with onboarding information when publishing a project to HomeByMe. Summary

Kitchen 2020.11.0

November 9, 2020

What’s New and Improved

Released

• Users can plan with full depth sinks. ² Set Up Sinks and Taps | Define Worktop Cut-Out Position
• Retailers can set linear pricing methods on non-linear products. ² Set Up the Pricing | Bill of Materials
• Retailers can choose to hide the “replace” button. ² Set Up the Behaviors
• Users have the back plinth automatically removed when setting a back panel to the floor. ² Set Up Cover Panels
• Users see a screen when the solution is under maintenance.
• Users can view images and 2D plans in full width on the Summary step (Bryo only).

Pre-release

• Users can split and merge worktops in the worktop editor (Entire feature). Editing Worktop
• Users can move worktops after they have been customised.
• Users can create notes on automatic fillers. Kitchen Planner Overview | Bill of Materials
• Retailers can update Summary step with no immediate integration requirement. ¹ Application Distribution
• Users can click a thumbnail on Summary step to enlarge the image.

Kitchen 2020.10.0

October 12, 2020

What’s New and Improved

Released

• Users can create favourites. ¹ Application Distribution
• Retailers can choose to not reset customised worktops and wall panel when the user changes product. ¹ Application Distribution
• Retailers have additional information available in the export worktop (cutout information for sinks and taps). ² Bill of Materials
• Retailers can overload all business rules. ² About Predefined Applicative Rules
• Retailers have an English translation as a fall-back for missing translation keys. Localizing Application

Released (previously in pre-release)

• Users can add notes to manual and corner fillers. Bill of Materials
• Users have a simplified view in worktop and wall panel editors.
• Retailers can order the menu bar. ¹
• Users can see which appliances are contained in each proposal. Pick a Layout

Pre-release

• Users can split and merge worktops in the worktop editor (Part 1). Editing Worktop

Kitchen 2020.9.0

September 14, 2020

What’s New and Improved

Released

• Users can see a date/price for delivery and installation. ¹
• Users are notified if their design contains multiple styles. ¹
• Users can ask for assistance from a retailer during the design process. ¹
• Users can only create drainer grooves on compatible worktops and sinks. ²
• Retailers can remove the worktop front edge option. ¹
• Retailers can manage the type of hinge of each cabinet. ²
• Retailers can choose the type of product mappings. ²

Released (previously in pre-release)

• Users can see the monthly price of their project. ¹
• Users have a guided tour when using the solution for the first time. ¹
• Users can request multiple HQ images faster.
• Retailers can upload their own branding settings.
• Sub-title has been removed from the cabinet editor.

Pre-release

• Users can add notes to manual and corner fillers. Bill of Material
• Users have a simplified view in worktop and wall panel editors.
• Retailers can order the menu bar. ¹
• Users can see which appliances are contained in each proposal. Pick a Layout

Kitchen 2020.8.0

August 17, 2020

What’s New and Improved

Released

• Users can add wall panels to the side of base cabinets when touching a wall. ²
• Retailers can configure business rules for half height cabinets. ¹
• Retailers can set the pricing method for wall edge strips. ¹
• Retailers can price using coefficient based pricing. ¹
• Worktop BoardID has been added in the Bill of Materials (BOM). ¹
• Iframe messaging for price information when in editors supports both legacy and current method.
• Enhanced project information is available in HomeByMe when exporting a project from HomeByMe for Retailers.
• Retailers can see the total project price within the template editor.
• Retailers can see the type of “relative placement” constraint within the template editor.

Released (previously in pre-release)

• Users can create high quality images from outside of the room.
• Users can replace cabinets for items of the same width but a different depth.
• Users can view information about the different types of wall panels when entering the wall panel editor.
• Retailers can price linears per millimetre. ¹

Pre-release

• Users can see the monthly price of their project. ¹
• Users have a guided tour when using the solution for the first time. ¹
• Users can request multiple HQ images faster.
• Retailers can upload their own branding settings.
• Sub-title has been removed from the cabinet editor.
• Users have an enhanced experience within the Summary step, showing clear information about delivery, installation, finance and more. Summary | Summmary Step Configuration
• Users are prompted to create a HQ image of their project if no images have been created.

Kitchen 2020.7.0

July 20, 2020

What’s New and Improved

Released

• If a user inserts a cabinet which cannot have the same style applied as they are currently using (such as front) they are notified. ¹
• Retailers can choose to remove the price within the cabinet editor. ¹
• Business rules relating to ovens now check both the oven cabinet and the appliance itself.
• If an illustration purpose product is incorrectly created with a price, then it will be displayed as a regular saleable item.
• Users selecting a worktop board in the editor will see dimensions of each edge.
• Retailers can define if a worktop edge is priced when on the front of a worktop. ²
• Half height cabinets are now supported within the solution.
• Retailers can choose to hide the cutouts from 2D plans. ¹
• When retailers create designs in the template editor they are notified of any potential worktop issues. ²
• Retailers can access a stable UUID in the BOM. ¹

Released (previously in pre-release)

• Users no longer have to select each worktop or wall panel edge to find out what reference has been assigned. When entering the editors clear information about the edge is shown by default, and this can be hidden with just a click. ¹²
• Users can see if a product is custom, precut or for illustration purposes only within the worktop and wall panel editors.
• If a user suffers a power cut, browser crash, or an unexpected error they will be prompted to recover their project when returning to the solution, meaning they don’t have to start from scratch, even if they have never saved their project.
• What users see within the cabinet editor corresponds to what is priced. We now only show items in the cabinet editor that are part of the cabinet itself meaning that additional items such as worktops, plinths and legs are no longer displayed. Users can also replace appliances, sinks and taps directly within the cabinet editor allowing users to fully customise their cabinet.
• Users can add project notes within the notes layer, meaning that item notes and project notes can be viewed/amended in the same location.
• If users need a little more accuracy when planning their project, they can precisely rotate an item by entering a specific degree of rotation.

Pre-release

• Users can create high quality images from outside of the room.
• Users can replace cabinets for items of the same width but a different depth.
• Users can view information about the different types of wall panels when entering the wall panel editor.
• Retailers can price linears per millimetre. ¹

Kitchen 2020.6.0

June 22, 2020

What’s New and Improved

Released

• Users can see an estimated delivery date on Summary step of the solution. ¹
• Users can duplicate and position multiple items on Design my room step.
• Retailers can price filler pieces based on linear height. ²
• Retailers can configure standard worktops to use waterfall worktops that are a different product reference. ²
• Waterfall worktops by default use a double sided worktop board. ²
• Waterfall worktops within the worktop export are easier to detect and include enhanced board and joint information.
• Freestanding worktops can have options applied including double side and waterfall. ²

Pre-release

• Users no longer have to select each worktop or wall panel edge to find out what reference has been assigned. When entering the editors clear information about the edge is shown by default, and this can be hidden with just a click. ¹²
• Users can see if a product is custom, precut or for illustration purposes only within the worktop and wall panel editors.
• If a user suffers a power cut, browser crash, or an unexpected error they will be prompted to recover their project when returning to the solution, meaning they don’t have to start from scratch, even if they have never saved their project.
• What users see within the cabinet editor corresponds to what is priced. We now only show items in the cabinet editor that are part of the cabinet itself meaning that additional items such as worktops, plinths and legs are no longer displayed. Users can also replace appliances, sinks and taps directly within the cabinet editor allowing users to fully customise their cabinet.
• Users can add project notes within the notes layer, meaning that item notes and project notes can be viewed/amended in the same location.
• If users need a little more accuracy when planning their project, they can precisely rotate an item by entering a specific degree of rotation.