released

Collision with Openings

Check Rule

OpeningCollisionRule

Collision with Openings.

Notification level: ℹ

KeyValue
IDOpeningCollisionRule
Translation keyopening_collision_rule_title
opening_collision_rule_error_message

Behavior

This rule checks the collision between the opening(door/window) and cabinet (base, wall, high, corner, fillers or half height) or an appliance.

Trigger Conditions

It is triggered if there is a collision between the opening(door/window) and cabinet (base, wall, high, corner, fillers or half height) or an appliance or if the distance between them is less than the distance parameter. The application recommends to modify the position of the cabinet or appliance in order to avoid user from creating a dangerous kitchen.

Affected Products

  • High Cabinet with the closed tag HighCabinets.
  • Base Cabinet with the closed tag BaseCabinets.
  • Wall Cabinet with the closed tag WallCabinets.
  • Corner Cabinet with the closed tag CornerCabinets.
  • Bathroom base cabinet with the closed tag BathroomBaseCabinets.
  • Half height cabinet with the closed tag HalfHeightCabinets.
  • Filler Strip angle with the closed tag FillerStripAngle.
  • Filler Strips with the closed tag FillerStrips.
  • Free Standing filler strips with the closed tag FreeStandingFillerStrips.
  • The cooktop product must have a closed tag Cooktops.
  • The washer product must have a closed tag Washers.
  • The dishwasher product must have a closed tag Dishwashers.
  • The fridge product must have a closed tag Refrigerators.
  • The oven product must have a closed tag Ovens.
  • The oven cabinet must have a closed tag OvenCabinets.
  • The sink product must have a closed tag Sinks.
  • The under sink cabinet must have a closed tag UnderSinkCabinets.
  • The single sink must have a closed tag SingleSinks.
  • The double sink must have a closed tag DoubleSinks.
  • The faucet must have a closed tag Faucets.
  • The dryer product must have a closed tag Dryers.
  • The cellar product must have a closed tag WineCellars.

This rule considers as a "opening" any product with one of these closed tags:

  • A single windows with the closed tag SimpleWindows.
  • A double windows with the closed tag DoubleWindows.
  • A simple sliding window with the closed tag SimpleSlidingWindows.
  • A double sliding window with the closed tag DoubleSlidingWindows.
  • A basement window with the closed tag BasementWindows.
  • A fixed window with the closed tag FixedWindows.
  • A double door with the closed tag DoubleDoors.
  • A glass door with the closed tag GlassDoors.
  • A shower door with the closed tag ShowerDoors.
  • A security door with the closed tag SecurityDoors.
  • A patio door with the closed tag PatioDoors.
  • A screen door with the closed tag ScreenDoors.
  • A doule interiro door with the closed tag DoubleInteriorDoor.
  • An interior door with the closed tag InteriorDoor.
  • A garage door with the closed tag GarageDoors.
  • A service door with the closed tag ServiceDoors.
  • A folding door with the closed tag FoldingDoors.
  • A sliding door with the closed tag SlidingDoor.
  • A swinging patio door with the closed tag SwingingPatioDoors.
  • A sliding patio door with the closed tag SlidingPatioDoors.
  • A double glass door with the closed tag DoubleGlassDoors.
  • A door with the closed tag Doors.
  • A front door with the closed tag FrontDoors.
  • A simple interior door with the closed tag SimpleInteriorDoors.

Overload Parameter

Key nameTypeDefault valueDescription
minDistancenumber1200This parameter defines the necessary limit distance between the opening(door/window) and cabinet or appliance placed in front of the opening. Optional.

Sample

{
    "minDistance":1200
}

Illustration

A cabinet or appliance is placed too close in front of the door/window and hinders the opening. The rule is triggered and informs the user to change the position of the cabinet or appliance.

cabinet/appliance and opening too close

Once the user has moved the cabinet/appliance away from the opening.

cabinet/appliance moved from opening

After clicking Refresh the check on the Help center, the design is now error free.

   

← PreviousNext →