Parameters for a Decoration Strip
This document contains all the possible or required parameters to set up a decoration strip in the Kitchen application.
➡️ See the tutorial Set Up Decoration Strips for a concrete case on the use of parameters in 3DCloud and Assembly Editor.
Mandatory Parameters
The following parameters are mandatory and must be set for a decoration strip.
Name | Type | Default Value | Possible Values | Visible | Function |
---|---|---|---|---|---|
width | real | – | [0 ;∞] | NO | Defines the product size of the model on the X-axis (from left to right). |
depth | real | – | [0 ;∞] | NO | Defines the product size of the model on the Y-axis (from front to back). |
height | real | – | [0 ;∞] | NO | Defines the product size of the model on the Z-axis (thickness of product). |
Optional Parameters
Reserved names
The following parameters are optional and the name of the parameter are reserved words (can not be modified). To set up these parameters you should use the exact name of the parameter.
Name | Type | Default Value | Possible Values | Visible | Function |
---|---|---|---|---|---|
ecoFeeCategory | string | – | - | NO | Defines the category id of linear product to find the weight of linear in range and retrieve the ecoFee value. It is used in EcoFeeRule. |
linearWeight | number | – | – | NO | Defines the weight per length of the decoration strip to calculate the overall weight. It should be in kilograms per meter, supporting either 2 or 3 decimals (with 3 decimals the retailer can be precise to the gram). It is used in EcoFeeRule. |
material | material | – | – | NO | Defines the material of the decoration strip. |
sectionOrientation | integer | 0 | 0 / 1 | NO | Enables the customer to choose a deco strip orientation; this orientation can change size of contiguous side panels if enabled. Possible values are: ▪️ 0 (Horizontal) ▪️ 1 (Vertical) |